Dimensions: 43 cm × 15 cm × 43 cm (h × w × d) Weight: 11 kg Ambient temperature range: 10 - 40°C Ambient operating humidity: 5 - 90% Mains power: 100-240 V AC, 50/60 Hz Power consumption: 80 VA Conforms to safety standards: - The European Low Voltage Directive (1973/23/EC) The Electromagnetic Compatibility Directive (1989/336/EC) -RoHS Directive Injector
Full electronic pressure/flow control Operating temperature: up to 600°C at a GC oven temperature of 35°C Cooling: air (down to 35°C), LCO2 (down to -50°C), LN2 (down to -180°C) Temperature ramp rates: 0.1 - 30 °C/sec Up to nine temperature segments can be programmed including negative temperature ramp Compatible with Merlin Micro-Seal septum Compressed air for cooling: moisture and oil free air at a pressure of 500 kPa (80 PSI) Electronic Gas Control
Two Electronic Gas Control channels Full electronic control of column, split and septum purge flows Column Flow and Pressure control modes Pressure range: 2 - 100 PSI Flow range: 6 - 300 ml/min He (main channel, all models), 2 - 100 ml/min He (auxiliary channel, OPTIC 3-D and DC only) Pressure sensors: - accuracy : ± 2% full scale -repeatability: ± 0.2% full scale Flow sensors: - accuracy : ± 2% full scale -repeatability: ± 0.2% of full scale Up to nine flow/pressure segments can be programmed He, N2 or H2 as carrier gas at a maximum pressure of 100 PSI (700 kPa) Solvent sensor in the split line for optimization of LVI injections External Communication
LAN RS-232 (115,200 baud max.) Seven auxiliary relay outputs (30V/500 mA max.) External 5 V and 24 V supply connections (250 mA max.) Remote start/stop to GC and autosampler Four auxiliary inputs Options H300000 OPTIC 3-S OPTIC 3 Injection System with single electronic gas control channel including Evolution Workstation control software. Excluding mounting hardware and installation*.
H300001 OPTIC 3-D OPTIC 3 Injection System with double electronic gas control channels, including Evolution Workstation control software. Excluding mounting hardware and installation*.
H300002 OPTIC 3-SC OPTIC 3 Injection System with single electronic gas control channel including, cryogenic trap option and Evolution Workstation control software. Excluding mounting hardware and installation*.
H300003 OPTIC 3-DC OPTIC 3 Injection System with double electronic gas control channels, including cryogenic trap option and Evolution Workstation control software. Excluding mounting hardware and installation*. * specify GC type and autosampler
H400055 OPTIC 3 Injector Body for ¼" Tubes This injector body can be used to insert ¼Inch tubes for air analysis.