Temperature Temperature range 4°C to 99°C Temperature set point precision 0.1°C Block uniformity (over full range) ± 0.5°C Temperature accuracy ± 0.5°C End of program cooling below ambient Yes
Heating/Cooling Rate Maximum heating rate 4.5ºC/s Minimum heating rate 0.1ºC/s Maximum cooling rate 3.0ºC/s Minimum cooling rate 0.1ºC/
Heated Lid Heated lid enable/disable Yes Selectable heated lid temperature 100°C to 115°C Over-temperature cut-out Fixed at 145°C Temperature sensor Thermistor Heater type Etched foil Heater power 33W Warm up time 4 min approximately (ambient to 105°C) The heated lid will only come on if the set temperature is above 35°C
Programming Program naming using alpha keys Yes Program password protection Yes Number of programs (3 step) 37 Maximum number of ste er stage 35 Maximum number of stages per program 25 Minimum hold time 1 sec Maximum hold time 18 hrs Incremental/decremental temperature Yes Incremental/decremental step hold time Yes Programmable ramp rate (heat or cool) Variable in 0.1°C/sec steps Programmable ramp rate resolution 0.1°C
Running Program Pause button Yes Stop button Yes End of program alarm Yes Auto restart on power fail Yes
Interconnectivity Connection to PC control program Yes Software updates from web-site Yes
Dimensio Height 185mm Width 185mm Length 330mm
Power Power consumption 230W
Units marked 100V will work at any voltage between 90 and 110V. The performance will vary and will not necessarily meet the above typical specification at the extremes of voltage.
Maplelab CYCLER III 基因扩增仪(PCR),CYCLER III
Maplelab CYCLER III 基因扩增仪(PCR)信息由西安比尔电子科技有限公司为您提供,如您想了解更多关于Maplelab CYCLER III 基因扩增仪(PCR)报价、型号、参数等信息,欢迎来电或留言咨询。