1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments
Molding Temperature
120 - 360°F [50 - 80°C] in 20°F [10°C] increments
Heating Power
1500Watt @ 115/230VAC
Heating Time
0 - 20 minutes in 10 second increments
Cooling Time
0 - 30 minutes in 10 second increments
Mold Type
Cylindrical, including upper and lower rams and duplex mold spacer
Closure Type
Insluated bayonet with piston indent
Mold Diameters
1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm
Touch-pad Controls
On/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods
Units of Measure
Imperial or Metric
Water Flow Rate
0.5gal/min [2ℓ/min] minimum
Water Pressure
45-75psi [3-5bar]
Control Voltage
24VDC
Method Programmability
4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods
Preload Pressure
0 - 400psi [0 - 30bar] in 50psi [5bar] increments
Thermoplastic Function
Automatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion