通用热压镶嵌机

400-6699-117转1000

AI问答

可以做哪些实验，检测什么？可以用哪些耗材和试剂？

该款通用热压镶嵌机适用于具有多种镶嵌样需求的实验室用户。采用预编程记录各种镶嵌方法，可对不同尺寸的镶嵌样进行重复制作。

产品优点：

可编程性降低复杂性

适用于有多种镶嵌样需求且镶嵌尺寸不同的实验室。

存储和撤销5种不同的程序，降低复杂性和消除错误，提供灵活性来满足多变的实验室要求

通过选择不同尺寸的模具来优化各种各样的试样大小。节约镶嵌介质并提升镶嵌质量

Specifications
Operation	Automatic electro-hydraulic
Power Source	85-264VAC, 50/60Hz, 1 phase
Molding Pressure	1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments
Molding Temperature	120 - 360°F [50 - 80°C] in 20°F [10°C] increments
Heating Power	1500Watt @ 115/230VAC
Heating Time	0 - 20 minutes in 10 second increments
Cooling Time	0 - 30 minutes in 10 second increments
Mold Type	Cylindrical, including upper and lower rams and duplex mold spacer
Closure Type	Insluated bayonet with piston indent
Mold Diameters	1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm
Touch-pad Controls	On/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods
Units of Measure	Imperial or Metric
Water Flow Rate	0.5gal/min [2ℓ/min] minimum
Water Pressure	45-75psi [3-5bar]
Control Voltage	24VDC
Method Programmability	4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods
Preload Pressure	0 - 400psi [0 - 30bar] in 50psi [5bar] increments
Thermoplastic Function	Automatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion
Compliance	In accordance with EC Directives

通用热压镶嵌机信息由北京创诚致佳科技有限公司为您提供，如您想了解更多关于通用热压镶嵌机报价、型号、参数等信息，欢迎来电或留言咨询。

注：该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案，不可用于临床诊断或治疗等相关用途

AI问答

通用热压镶嵌机 - 产品推荐