High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands
采用高纯氧化铝作为炉膛材料,最大程度减小能量损失,比一般加热炉减少30%能耗。
Two 8 mm diameter hose barb connectors (gas inlet and outlet) (see pic below) in the furnace back
炉体后面有两个Φ8mm 的通气口,可以在烧样时通入惰性气体。
炉体采用双层结构,中间设置风道,保证炉体表面温度和电气控制部分温度不超过60℃。
采用弹簧门扣,很好的解决了设备内膛因高温产生的收缩缝隙。
Working Temperature
工作温度
Max. Temperature: 1100℃( 1 hr)
最高温度:1100℃ (1小时)
Continuous working temperature: ≤1000℃
持续工作温度:≤1000℃
Recommended Heating Rate: 5-40℃/min
推荐升温速率:5-40℃/分钟
Max. heating rate:50℃/min
最高升温速率:50℃/分钟
Temperature Controll
控温方式
PID automatic control and auto-tune function.
模糊PID控制和自整定调节
30 programmable segments for precise thermal processing.
智能化30段可编程控制
Built-in protection for the over-heated and broken thermocouple.
超温和断偶报警功能
Thermocouple
热电偶
K type
K型
Heating Elements
加热元件
Fe-Cr-Al Alloy doped by Mo
电阻丝(掺钼铁铬铝合金)
Temperature Accuracy
控温精度
+/- 1℃
Dimensions
尺寸
Chamber size(L*D*H): 100*100*100mm (1L)
腔体尺寸(长*深*高):100*100*100mm (1L)
Furnace size(L*W*H): 230*250*370mm
炉子尺寸(长*宽*高):230*250*370mm
Net Weight
净重
12kg
Packing dimensions(L*W*H)
包装尺寸(长*宽*高)
370*300*450mm(wooden case)
370*300*450mm(木箱)
Shipping weight
毛重
18kg
Warranty
质保
One year limited warranty with lifetime support (Such consumable parts as resistance wire are NOT supported by the warranty)
一年质保终身支持(消耗品如电阻丝不在质保范围内)
Attention
警示
The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen.
此设备腔体不密封,不能通入有毒有害,易燃易爆气体。可以加装进气接头,通惰性气体或者氧气
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
在使用过程中炉膛表面可能出现细小裂纹。这是正常情况,裂纹可以用氧化铝涂层修复。
You shall place the sample in to a crucible. Never place sample on the chamber bottom directly.
建议将样品放进坩埚里。不要把样品直接放在腔底。
Compliance
认证
CE Certified
CE认证
All electric components ( >24V) are UL / MET / CSA certified
所有电气部件( >24V)都有UL / MET / CSA 认证
The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.