Second harmonic of Er-doped fiber laser operates at wavelength of 780nm and in a number of applications can replace the powerful yet less reliable solid-state Ti:S lasers. Easy to use design, turn-key operation, small footprint greatly facilitate any research in which the laser is involved. Lack of laser experience is not a problem with the fiber lasers, only general electronics and light physics knowledge is required to work with the unit. EFOA-SH is also a perfect source for amplifier system seeding due to one-box compact design and lack of expensive pump laser as in case of Ti:S solid-state seed.
EFOA-SH
Pulse Width (FWHM), fs
<120*
Wavelength, nm
780±10
Average output power, mW
>80
Repetition rate, MHz
70**
Spectral width, nm
~7.5
Outputs:
Power output (switchable apertures***): >80 mW, 780 nm, TEM00, linearly polarized >160 mW, 1560 nm, TEM00, linearly polarized Service optical output: 1560 nm, FC/APC (~1 mW) RF SYNC Out: SMA connector Mode Lock Status: SMA connector (3.5/0V) and Led
Operating temperature, °C
22±5
Warm up time for rated accuracy,min
20
Electrical data
110...220 VAC, 50/60Hz
Dimensions
Laser head, mm
270x270x122.5
Control unit, mm
230x200x130
Crystal oven control unit, mm
160x200x75
* - <100fs pulse durations available upon request ** - please indicate the necessary value when placing an order (from 25 to 80MHz). *** - simultaneous dual output is also possible upon request with >80 mW@1560 nm and >80 mW@780 nm.