400-6699-117转1000
您好,欢迎您查看分析测试百科网,请问有什么帮助您的?
参考报价: | 面议 | 型号: | ProEM |
品牌: | PI | 产地: | 美国 |
关注度: | 103 | 信息完整度: | |
样本: | 典型用户: | 暂无 |
400-6699-117转1000
New!
The latest generation ProEM-HS: 512BX3 delivers > 60 full frames per second at 20 MHz (twice the previous generation ADC speed). It provides this performance without compromising on the other features researchers expect from Princeton Instruments: lifetime vacuum guarantee, low noise, ultra-high frame rates, time stamping etc. In fact, our engineers improved all around performance including the low noise, standard CCD operation for even lower noise operation.
Patented eXcelon3 technology for enhanced QE (> 95%) and the best fringe suppression
20 MHz readout speed
300 ns vertical shift rate
Ultra-high speed readout mode for >1000 fps in imaging mode and >10,000 fps in spectroscopy mode
Improved noise (~4.9 e- rms @ 1MHz) in traditional CCD mode
Fully compatible with our award winning IsoPlane spectrographs and LightField software
ProEM Key Features and Benefits
Cooling
ProEM uses the most advanced vacuum and cooling technology with all-metal hermetic seals
All-metal seals: Good
vacuum is key to achieving deep cooling and consequently low dark
noise. Traditional epoxy based seals degrade over time and compromise
vacuum performance due to out-gassing. In contrast, Princeton
Instruments’ proprietary all-metal sealed design provides highest level
of vacuum performance, year after year. Even the vacuum window, the only
optical surface in the optical path, is brazed (fused at molecular
level) to the vacuum chamber.
Permanent vacuum guarantee: ProEM comes with PI’s lifetime vacuum guarantee. It is the only such guarantee of its kind in the industry and is backed by advanced vacuum technology and thousands of cameras in the field!
Options: Options galore! Say goodbye to compromises. ProEM delivers the highest performance using air, liquid or a combination thereof.
Air only: Most convenient of all - just connect the camera and go. ProEM is cooled using a built-in, low-noise fan.
Liquid only: In vibration sensitive applications such as microscopy, any moving parts such as internal fans create vibration. Astronomy applications require that there be no air turbulence around the telescope optics which can cause de-focusing. Liquid-only cooling method eliminates heat and vibration while achieving maximum cooling performance. This is superior to temporarily turning off the fan, which compromises the cooling stability over long periods.
Air+Liquid: When your application requires all the cooling and the lowest dark noise - use cold liquid circulation and the built-in fan in ProEM to get even better cooling and reduce dark current.
Low Noise
PINS (Princeton
Instruments Noise Suppression technology): Princeton Instruments'
engineers have used the next generation electronics to get the lowest
possible noise levels in ProEM. In EM mode, the ProEM delivers the
lowest starting read noise of any camera in the market, an advantage
considering only a small amount of EM gain is required to achieve <1
e- rms effective read noise.
For
traditional readout port, the camera delivers 3 e- rms read noise at
100kHz, an unparalleled performance. Whether it is fast or slow
application, the ProEM delivers the lowest noise combination ever
achieved. Part of the technology also includes proprietary methods to
reduce clock-induced charge –an unwanted noise source in EM applications
requiring single photon detection. It is reduced to 0.002 e-/p/frame
with careful optimization of clock timing and voltage levels on every
camera.
Sensitivity
eXcelon3 back-illuminated EMCCD: At the heart of ProEM is a back-illuminated EMCCD with patented eXcelon3 sensor technology that
delivers greater than 90% quantum efficiency, single photon
sensitivity, and reduced fringing (etaloning). No other EMCCD sensor can
claim to have such proven performance.
Single window vacuum design: The double-sided, anti-reflection (AR) coated vacuum window is the only optical surface between incoming photons and highly sensitive CCD surface. A choice of AR coatings are available to get the best throughput from UV to NIR.
ProEM uses only one optical window that can be custom AR coated for high throughput
Traditional CCD or “Non-EM” mode: While
the EM mode is ideal for low light, high speed imaging applications,
the non-EM or traditional readout amplifier is the best for slow scan
applications - for example, astronomical imaging requiring minutes to
hours of exposures. By reading out slowly, ProEM delivers 3 e- rms read
noise at 100 kHz even in non-EM mode.
Non-EM mode offers the best SNR for steady state applications requiring long integration times
Options
Numerous
options - No more compromises! ProEM delivers the highest performance
using air, liquid or a combination thereof. The cameras can be cooled
below -90° C for the lowest dark noise. For traditional readout port,
the camera delivers 2.5 to 3 e- rms read noise at 100 kHz, an
unparalleled performance. Whether it is fast or slow application, the
ProEM delivers the lowest noise combination ever achieved.
Part
of the technology also includes proprietary methods to reduce clock
induced charge –an unwanted noise source in EM applications requiring
single photon detection. It is reduced to 0.005 e-/p/frame with careful
optimization of clock timing and voltage levels on every camera.
Speed
Video frame rates and better: ProEM
provides better than video rate even at full resolution (512 x 512).
But if you need hundreds of frames per second, a combination of binning
and region of interest (ROI) can be used. For even higher frame rate, a
“high speed” camera mode allows 3 to 5 times higher frame rate when only
a partial area of the CCD is illuminated.
It
is all delivered to the host computer on the latest Gigabit Ethernet
(GigE) interface – a first for a scientific EMCCD camera. ProEM
implements precision time stamp feature – another first!
Kinetics: Need to capture a process with microsecond time resolution or at millions of frames per second in a burst?
ProEM fully supports Kinetics. a special readout mode, right out of the
box. By illuminating only a small portion of the sensor, a series of
sub-frames can be captured and shifted in microseconds vastly increasing
the time resolution.
ProEM offers Kinetics readout mode for microsecond time resolution. The mode requires that only a partial area is illuminated
Variable Vertical transfer time: The vertical transfer time, which determines the smear and affects frame rate, can be varied from 300nsec and up through software control.
Precision
OptiCAL: EM
calibration gone optical! A precision light source built into every
camera is used to generate a linearized EM gain map on demand by the
user. In the software you control the EM gain in absolute steps. In
other words, What you see is what you get!
ProEM uses a built-in precision light source for accurate, linear calibration of EM gain.
BASE: Bias Active Stability Engine. Whether you are acquiring images over hours or days, BASE allows you to achieve consistent, repeatable reference bias.
Mechanical shutter: While
the frame transfer architecture of ProEM EMCCDs does not require a
mechanical shutter for normal operation, it is very helpful when you
need to block external light to acquire reference background images.
ProEM comes with a built-in mechanical shutter for capturing dark
references and protecting the sensor from dust or debris.
Vibration-free: ProEM
was designed from the beginning for ultra-sensitive setups such as
microscopy and ion imaging which require no vibration introduced in the
system. Simply turn off the fan permanently and use liquid cooling.
Heat Free: Another
added benefit to “Liquid only” cooling - the heat is carried away from
the camera without generating air turbulence around sensitive optics
such as telescopes.
Time Stamp: No more guessing
as to when an image is actually captured. Traditionally time stamping
is done on the host computer using low precision CPU clock. In contrast,
ProEM actually stamps the frame data with precise time of capture with µsec resolution. This is essential for measuring fast kinetics over time.
Peace of Mind
Permanent
vacuum guarantee. Princeton Instruments covers ProEM camera’s vacuum
for the life of the camera – the only such guarantee in the industry. It
is supported by PI’s all-metal sealed design, years of experience in
deep-cooled technology and thousands of cameras in the field.
Anti-ageing: It is true that EM gain can degrade over time, especially when a large gain is used in high light conditions. ProEM uses every anti-ageing measure including clock voltage optimization to reduce the effect of ageing. The deep cooling allows the high voltage clocks to be operated well below the maximum ratings, while still achieving greater than 1000x EM gain.
Worldwide support: Princeton
Instruments is a well-respected manufacturer of high-quality products in
the scientific community. With years of application expertise and low
light camera technology, our worldwide representatives are ready provide
the best solution to the most demanding applications.
Imaging EMCCD Cameras | Imaging Array | Sensor Type | Pixel Size | Peak QE |
NEW! ProEM-HS:512BX3 | 512 x 512 | B/I, eXcelon3 FT | 16 x 16 µm | ~95% |
ProEM+:1024B | 1024 x 1024 | B/I FT | 13 x 13µm | ~95% |
ProEM+:1024B eXcelon3 | 1024 x 1024 B/I FT | B/I eXcelon3 FT | 13 x 13µm | ~95% |
ProEM系列增强型EMCCD信息由北京鼎信优威光子科技有限公司为您提供,如您想了解更多关于ProEM系列增强型EMCCD报价、型号、参数等信息,欢迎来电或留言咨询。
注:该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案,不可用于临床诊断或治疗等相关用途