400-6699-117转1000
咨询列表
上海森澜科学仪器有限公司
您好，欢迎您查看分析测试百科网，请问有什么帮助您的？
诚信认证:
工商注册信息已核实！
扫一扫即可访问手机版展台
| 参考报价： | 面议 | 型号： | Mark3 |
| 品牌： | 暂无 | 产地： | 暂无 |
| 关注度： | 66 | 信息完整度： |  |
| 样本： | 典型用户： | 暂无 |
400-6699-117转1000
| Omnimark Instrument Mark3模块化的水份测定设备用于样品量极大的生产检验。Mark3是根据失重法(Loss On Drying)的测试原理。它主要由两个模块组成，加热和控制模块。加热模块利用红外线石英管加热，使样品均匀地快速受热。控制模块更可同时连接四组加热模块，同时检定四个相同或不同样品，增加检定效率。每个模块可以设定不同的测量参数。在设置菜单中存储的表格可以控制哪个用户可以使用哪个模块，防止从其他人的模块测量引起的混淆，确保测量的可追溯性。 | |
| 另外，Mark 3特别适合用于塑料行业，它在塑料行业的优势（主要与卡氏法水分仪比较）： | |
| 加热失重法原理，检测无需试剂，无后期费用 | |
| 检测时无释放有毒气体，更环保 | |
| 样品无需预处理，操作简便，既能用在实验室也能用在车间现场 | |
| 标准ASTM6980(该标准专门针对塑料水分检测的) | |
| |
| 2 Models | Mark 3 | Mark 3 HP |
|---|---|---|
| Display of results | 0.01% | 0.001% |
| Balance resolution | 0.001 grams | 0.0001 grams |
| Balance capacity | 100 grams | 100 grams |
| Balance repeatability | +/-0.0005g | +/-0.0001g |
| Recommended working range | 0.02 to 99.98% | 0.005 to 99.995% |
| Specifications | |
|---|---|
| Method of Measurement: | Loss on drying via four infrared quartz cylinders |
| Modular configuration: | Control and Heater modules (Optional: up to 4 heater modules) |
| Temperature setting/control: | 30-210o C in one degree increments via RTD sensor, +/- 1oC |
| Temperature steps: | Programmable one or two with selectable ramp rate |
| Standby temperature: | 30-160o C in one degree increments with selectable equilibration time |
| Temperature display: | Display of both target and current temp at each stage of testing and standby |
| Conserve mode clock: | Programmable time by day of week to shut down and wake up analyzer |
| Balance module design: | Monolithic weighing cell with protective stainless steel cover |
| Balance calibration: | Internal calibration weight or external weights accepted for manual calibration |
| Ideal weight: | Audio and visual display for programmable target sample weight addition |
| Target limit alert: | Minimum and maximum programmable limits and screen alert when test done |
| Program storage: | 300 programs with unique settings, alphanumeric naming |
| Result storage: | 999 results with statistics: Average, SD, RSD, high and low |
| Units of measure of results: | Weight, %Moisture, %Solids, %Volatiles, Fuel Moisture, PPM, mg/L |
| Endpoint determination: | Actual slope, Calculation and Time modes |
| Sample ID: | Numeric, incremental, alphanumeric or turned Off |
| Modes of operation: | Standard test, Syringe, "Splash" method or Concentration modes |
| Security mode: | Selectable setup and operation protection with numeric code |
| Graph mode: | Graph of temperature and percentage over time |
| Display: | Quarter VGA with contrast adjustment (black on white or white on black) |
| Keypad: | Sealed membrane with audible tactile feedback |
| Internal printer: | Built-in thermal, 40 character graphic with selectable format |
| Power requirements: | 90-250 VAC 50/60 Hz self adjusting power supply |
| Dimensions (L x W x H): | 16.25'' x 19.5'' x 9.25'', shipping weight 35lbs (includes one heater module) |
| Warranty period: | 2 years, complete parts and labor |
塑料粒子专用水分测定仪信息由上海森澜科学仪器有限公司为您提供，如您想了解更多关于塑料粒子专用水分测定仪报价、型号、参数等信息，欢迎来电或留言咨询。
注：该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案，不可用于临床诊断或治疗等相关用途
