| Programmable Light Bar Life Tester--系统规格表 (PLBL- 40- V/I -CP - SD) |
| 外型尺寸
Exterior dimension | 480 * 510 * 560 cm (W*H*D)(包含突出部份) |
| 标准Channel
Standard Channel | 5 Channel /模块/87.5w (每台zei大40channel)
5 channel/module/87.5w (max 40channel/set) |
| zei大控制模块数量
Maximum control Module | 8 模块/700w
8 module/700w |
| 设定方式
Method of Test setting | 设定模块方式 (开始/停止) 每模块独立控制,可设定不同电流与参数
Set module (start/stop) ; each module single control ,can set different current &data |
| 输出电压/电流范围
Output voltage/current range | 0~35V/ 0~500mA(0.1V/1mA/Step)/channel |
| 操作模式
Operation mode | 定电流/定电压 切换
CC/CV Switch |
| 数据取样速度与通讯界面
sample rate &com interface | 200ms (Sample to Controller) , 5sec (Sample to PC) & RS485 |
| Continuous Mode
ON-OFF Mode
PULSE Mode | 可选择连续输出
可选择ON-OFF脉波设定(0~999.9sec), cycle设定功能(5位数)
可选择pulse模式;peak pulse current ;1/10 duty pulse width (1mS) |
| 电流设定/zei大试验时间
Current Set/Max test time | 测试电流&电压---10CH(Bias电流/电压设定-- 正电流/电压 设定) / 9999.9Hr
Test current & volt –10CH(setting of bias positive current & volt --test positive current & volt setting) |
| 数据读取&连结台数
Data reading &link number
of machines | 同时读取/ 记录各channel电压/电流值/板温/chamber温湿度值 zei多32台
read /record value of the voltage ¤t & temp. of channel and T/H values of each Chamber /max 32 Set |
| 输出准确度与表头分辨率
Output & indicator | 1%+-2mA & 0.1V/1mA |
| 电压/电流 值 转换图形曲线
Voltage / Current values Conversion curve | 记录电压与电流值可转换为图形曲线
record the voltage and current values of each Channel can convert the Curve |
| 电压/电流/板温 分析
Voltage /Current/Temp. Analysis | 记录 电压/电流/板温 开始 /取样/ 结束时间
Recording of the start /sample / end time of voltage/ current/ temp. |
| EXCEL报表转换
Excel report conversion | 条件设定数据, 量测数据,电压短路数据转换成EXCEL档案
Set condition data, measurement data and voltage shortage datd converted as Excel file |
| 电源
Power Source | AC110V/10A & 220V/5A , 50/60Hz |
移动版：